Diagnosing a Hot Water System Failure: How to Do When It Stops Working
Diagnosing a Hot Water System Failure: How to Do When It Stops Working
Blog Article
The article author is making a number of good observations regarding Hot Water Heater Repair in general in this content beneath.
Many modern homes make use of an electrical hot water heater for their heater, as a result of its ease and also convenience of use. However, much like any other electric appliances, problems might occur with its use, all of a sudden. It can be really aggravating to awaken to a cool shower rather than a hot one or having your bathroom with water that isn't warm enough or even also hot. Whatever the case may be, hot water heater troubles can be fairly nerve-racking. Luckily, we've made a listing of possible solutions to your water heater concerns. There are a variety of variables that can create many of these problems, it could be a concern with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you shut off the primary power supply for safety. Whatever the problem is, getting it fixed ought to not posture too much of a concern if you adhere to these steps:
Call A Professional:
If after changing all damaged parts and resetting your temperature, the hot water heater still isn't working, you may need to contact a specialist plumber for a professional point of view. The issue with your heating system could be that the hot and cold faucets have been changed or it might be undersized for the amount of warm water required in your house. Whatever the instance might be, an expert plumber would assist solve the problem.
Examine Your Power Supply:
As basic as this might seem, it is very needed. Without appropriate power, your water heater will not operate. So the first thing to do when your water instantly stops working is to verify that it isn't a power problem. Examine if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the problem, just turn it on and off once again. Change any type of damaged or worn-out fuse. Evaluate the home appliance with power after these changes to see if it's now functioning.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't warm enough, you may need to inspect the temperature level setups on your top thermostat. Guarantee the breaker is turned off before doing anything. Open up the accessibility panel as well as press the red button for temperature reset above the thermostat. This must aid heat up the water. Transform the circuit breaker back on and check if the trouble has been fixed.
Check the Heating Element in the Water Heater:
If it's not a power problem, then try checking out your burner if it is still working. Test each of your heating elements to ensure the issue isn't with any of them. If any one of them is damaged, change that part and afterwards inspect whether the hot water is back on.
Verdict
Hot water heater issues are not constantly major. Much of them result from minor concerns like a blown fuse or worn-out burner. Replacing the malfunctioning components need to work. Nevertheless, if you are still not able to address the trouble, give a call to your nearby plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you liked our topic about How to Troubleshoot and Repair an Electric Water Heater. Many thanks for finding the time to browse our posting. Sharing is good. You just don't know, you may just be helping someone out. I am grateful for your time. Kindly check our blog back soon.
Learn More Report this page